Brazilian Cotton Fabric Hammock Chair with Fringe

Assembly and Installation Instructions

INDOOR HANGING INSTRUCTIONS

• Locate a Ceiling Joist by tapping or using a stud finder. The beam must be a solid straight-grained structural joist, usually found every 16 to 18 inches from each other.
• Vertically drill a 5/16-inch pilot hold in the middle of the joist for the screw to go into.
• We recommend that you rotate the screw eye in all the way to the eye for best support.
• Tie the 2 free ends of the chair ropes onto the large S-hook by using an overhand knot.
• Hang the S-hook onto the screw eye and determine the rope length that suites your ceiling height.
• The assembled chair should hang approximately 12 to 14 inches from the floor, based on your personal preference.
• You may need to make some adjustments to the rope until you find the right sitting height to accommodate your own height.
• Insert the dowels deeply into the boot cups.
• Get a good book or crossword puzzle and get ready to Relax!

INSTRUCTIONS FOR HANGING THE CHAIR OUTDOORS

• Tie a separate loop of rope over the tree limb, and drop it down to a height one can reach from the ground.
• Follow the hanging instructions from the instructions for Hanging the Chair Indoors beginning at Step 3.
• Once the chair is assembled, hook the large S-hook onto the rope loop of the chair.
• Some adjustments may need to be made until you find the perfect height for your desired relaxation.
• You may consider purchasing a Tree Strap & Carabineer Clamp for quick hook-up and release.