Assembly and Installation Instructions
INDOOR HANGING INSTRUCTIONS
- Locate a Ceiling Joist by tapping or using a stud finder. The beam must be a solid straight-grained structural joist, usually found every 16 to 18 inches from each other.
- Vertically drill a 5/16-inch pilot hold in the middle of the joist for the screw to go into.
- We recommend that you rotate the screw eye in all the way to the eye for best support.
- Tie the 2 free ends of the chair ropes onto the large S-hook by using an overhand knot.
- Hang the S-hook onto the screw eye and determine the rope length that suites your ceiling height.
- The assembled chair should hang approximately 12 to 14 inches from the floor, based on your personal preference.
- You may need to make some adjustments to the rope until you find the right sitting height to accommodate your own height.
- Insert the dowels deeply into the boot cups.
- Get a good book or crossword puzzle and get ready to Relax!
INSTRUCTIONS FOR HANGING THE CHAIR OUTDOORS
- Tie a separate loop of rope over the tree limb, and drop it down to a height one can reach from the ground.
- Follow the hanging instructions from the instructions for Hanging the Chair Indoors beginning at Step 3.
- Once the chair is assembled, hook the large S-hook onto the rope loop of the chair.
- Some adjustments may need to be made until you find the perfect height for your desired relaxation.
- You may consider purchasing a Tree Strap & Carabineer Clamp for quick hook-up and release.
Maintenance and Care Instructions
To wash, simply scrub with a soft brush using warm, soapy water and hang to dry. Do not put product into washing machine, a tumble dryer, or clean with any harsh chemicals (including bleach).